Hi all,
My original 54 horn is mounted on the radiator support on the drivers side in
the grille, and the accessory installation manual for same year echoes that
location.
All The Best!
><> ><> ><> ><> ><> ><>
><> ><> ><> ><> ><> ><>
George La Fountaine
Granada Hills, CA
Restoring Grandpa's 1954 Chevy 3104
glafountaine@socal.rr.com
----- Original Message -----
From: <MKlepp4335@cs.com>
To: <237459N@knotes.kodak.com>; <oletrucks-digest@autox.team.net>
Sent: Tuesday, June 06, 2000 5:26 PM
Subject: Re: [oletrucks] horn on '53
> In a message dated 6/6/00 11:58:15 AM Central Daylight Time,
> 237459N@knotes.kodak.com writes:
>
> << I've seen most located on the intake manifold. Is this "correct"? >>
>
> Patrick,
> No u-bolts, only the oil filter mounts that way. The original mount was
> multiple layers of thin, spring type steel about 2 inches long mounted
> between the horn and the manifold. This was to allow some flex to allow the
> horn to survive. Mine was broken, so I made one out of solid flat steel
> stock, drilled the holes and mounted it. It has held up fine for the last 4
> years. Unless you are entering the strictest shows judged by experts, no one
> will know but you, me and 500 of our closest friends on this list.
>
> Mike Klepp
> '48 3100
> Wichita Falls, TX
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
|