One option would be just to run the front brakes with the hydrovac, with the
rear brakes straight. I'm not sure what the pedal would feel like though. In
this case the front brakes would be providing most of the stopping power
unless there were a hydrovac failure, then they should be 50/50 with the
rear.
Rich Kinas
59 Fleetside
Orlando, FL
-----Original Message-----
From: owner-oletrucks@autox.team.net
[mailto:owner-oletrucks@autox.team.net]On Behalf Of NTemple46@aol.com
Sent: Thursday, March 29, 2001 1:40 AM
To: oletrucks@autox.team.net
Subject: [oletrucks] Dual Master Cyllinder...Hydrovac
I want to convert my brake system to dual master cylinder. Will I need to
have two hydrovac units? One for each line. It seems that this would be
the
case. I have a spare from my parts truck that I could add to the frame next
to the existing unit. OR...would it be easier to try a power brake setup?
I
am on a tight budget so cost is a factor.
Thanks, Neil
46 2-ton
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|