Re: [oletrucks] Window rubber

[MKlepp4335@cs.com]

Dave,
  I just did these on my '48.  The door glass must be removed to get at the 
strips.  They slide into a channel spot welded to the inside of the door 
about an inch or so below the window opening.  They ride on the outside of 
the glass as the window goes up and down.  Not the easiest thing I have ever 
done, but not impossible either.  Good luck.

Mike Klepp
'48 3100
Wichita Falls, TX
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959