I have a 46 and the only fuse in the truck I can find is installed on the
back of the headlight switch. This seem to work for ALL lights connected to
this switch (headlight/taillight/parking and the brake light.
NHJim
-----Original Message-----
From: owner-oletrucks@autox.team.net
[mailto:owner-oletrucks@autox.team.net]On Behalf Of joe
Sent: Monday, May 07, 2001 3:19 PM
To: Hanlon, Bill; Tom3600@webtv.net; oletrucks@autox.team.net
Subject: Re: [oletrucks] Brake light switch
Hi Bill,
Wasn't the two circuit fuse block on the drivers side firewall for parking
and stop lights?
Joe
-----Original Message-----
From: Hanlon, Bill <Bill.Hanlon@COMPAQ.com>
To: 'Tom3600@webtv.net' <Tom3600@webtv.net>; oletrucks@autox.team.net
<oletrucks@autox.team.net>
Date: Monday, May 07, 2001 11:05 AM
Subject: RE: [oletrucks] Brake light switch
>Assuming no turn signals, that is all that is involved.
>Even though there wasn't a fuse in the circuit originally,
>if it were me I'd protect the circuit with a fuse between
>the switch and where ever you are getting the "hot" from.
>
>-----Original Message-----
>From: Tom3600@webtv.net [mailto:Tom3600@webtv.net]
>Sent: Sunday, May 06, 2001 7:48 PM
>To: oletrucks@autox.team.net
>Subject: [oletrucks] Brake light switch
>
>
>I need some help. I am rewiring my stock '49 Chevy brake light switch.
>Do I just put a hot wire to one brake light switch post connector and a
>wire to the brake lights from the other post on the switch or is it more
>complicated??
>
>Thanks,
>
>
>Tom Poterack
>Moline, IL.
>'49 Chevy Pickup Retro Rod
>http://community.webtv.net/TOMPOT/TOMS1949CHEVYPICKUP
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|