If you find one for a 1950 1/2 ton 3100 series, please contact me.
John T.
On Sat, 29 Sep 2001 16:18:42 -0400 "Jhouse" <jhouse@ccsol.com> writes:
> Well, I have a 45 Chevy 1/2 ton and the device that holds the spare
> as a
> repro cost $200.00. I was bidding on one on exxx and when it went
> over $150
> I jumped. I was looking it the FLAPS and found and purchased a
> $2.00 spare
> tire hold down. Well I slid under the truck and this fit great in
> one of
> the holes in the cross member. Then I was able to spin it up with
> the
> bowtie bolt and the divider/wedge fits great inside my spare rim. I
> cranked
> it tight and the tire will not move or rock around etc. I did have
> to move
> the tail pile about 2 inches towards the driver door. Well this
> bolt screw
> that is holding the tire is only about 1/2 inch thick. Do you think
> this
> will work long term? Am I just asking for trouble? Any other
> ideas?
>
> Thanks,
> NHJim
> 45 Chevy 3104
> oletrucks is devoted to Chevy and GM trucks built between 1941 and
> 1959
>
1927 Model T Roadster $*&#
1949 Ply & 1950 Chev PU to be restored
1952 5 window Chev PU (mine) restored
1954 Chev. PU (hers)
Lakeland , Fl.
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|