Mark, If I remember correctly there are 2 bolts holding the fender to the
cowl, one high and one low on each side. There is an ell bracket with 2
nuts on studs down low on the toe board holding the inner fender (both
sides). There are 2 bolts holding the core support to the frame on either
side of the radiator and there are 4 bolts at the hood springs. I think
that should do it!
Mike Boteler
'56 8400 Wrecker
Hughesville, MD
----- Original Message -----
From: "mark" <ccpanel@jps.net>
To: <oletrucks@autox.team.net>
Sent: Saturday, August 31, 2002 9:31 PM
Subject: [oletrucks] 55 clip take-off
> what/where are the primary bolts to remove the whole front body clip on a
56
> chevy truck?
> mark
>
>
> http://pweb.jps.net/~woodson
> http://home.infostations.net/ccpanel/projects/
> ...
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|