oletrucks
[Top] [All Lists]

Re: [oletrucks] Ignition switch

To: "53ChevyTruck" <kmm1024@webstorehosting.org>, <oletrucks@autox.team.net>
Subject: Re: [oletrucks] Ignition switch
From: "Steve Hanberg" <steve@OldSub.com>
Date: Sun, 6 Apr 2003 12:59:38 -0700
I had the opposite problem with the universal switch in my 55 1st.  The
bezel was too small, and I had to find something that would make it fit the
hole and stay in place.

----- Original Message -----
From: "53ChevyTruck" <kmm1024@webstorehosting.org>
To: <oletrucks@autox.team.net>
Cc: <old-chevy-truck@yahoogroups.com>
Sent: Sunday, April 06, 2003 12:20 PM
Subject: [oletrucks] Ignition switch


Has anyone used a later model ignition switch in a 47-53 truck that has
the start position?  Did the original switch have a bezel that screwed on
the outside?  I got a universal switch but it has a large bezel and will
take the paint off the dash when installing it.
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>