oletrucks
[Top] [All Lists]

Re: [oletrucks] steering box fluid

To: ke6bnl@juno.com
Subject: Re: [oletrucks] steering box fluid
From: wayne osborne <wayne@chevytrucks.org>
Date: Fri, 16 May 2003 13:49:20 -0400
The proper steering box lubricant is GM part #1052182, anything thinner 
will leak past the seal, thicker will not flow and lubricate all.   --wayne
I found this # in the archives..

At 10:07 AM 5/16/03 -0700, you wrote:
>On my other vehicle I was told by a old bus mechanic that cv joint
>lubricant was  the best, similliar type usages and I have had no problem
>yet.  Ed ke6bnl  So.Calif.
>
>
>
>Message: 25
>    Date: Fri, 16 May 2003 13:10:40 -0000
>    From: "vwnate1" <vwnate1@juno.com>
>Subject: Re: steering gear lubricant
>
>The mail thing is to use something fluid , _not_ grease ! STP or
>similar if your seal is hot but fluidity is critical as these boxes
>are recirculating ball typ and _will_not_ be lubricated if you squish
>grease in there .
>
>Any one here have acess to a Mc Kay catalog ? they should make some
>typ of steering box lube , they make everything else .
>
>I've heard nothing but good about American Classic , maybe they're
>just busy ? . two weeks isn't too bad .
>-Nate
>        Jim  wrote:
>+++++++++++++++++++++++++++++++++++++++++++++++++
>    Ed     ke6bnl@juno.com                     ( 1950 f1 & 1963econo pu
>
>       Agua Dulce Ca.    91390                    70 chevy S/B)  1948 Ford
>F3
>       So.   Calif. 70 mil N.Eof Los Angeles   1953 Chevy pu 3100)
>+++++++++++++++++++++++++++++++++++++++++++++++++
>
>________________________________________________________________
>The best thing to hit the internet in years - Juno SpeedBand!
>Surf the web up to FIVE TIMES FASTER!
>Only $14.95/ month - visit www.juno.com to sign up today!
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

Wayne Osborne
http://www.chevytrucks.org
http://www.chevytrucks.org/wayne
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>