RB's has them for TF trucks too. Santa brought me a pair two Christmases ago.
I agree with Andy's comments about them.
-----Original Message-----
From: Andy Johns [mailto:oldtruckguy@mindspring.com]
Sent: Monday, May 19, 2003 7:55 PM
To: 'K Ohlgren'; oletrucks@autox.team.net
Subject: RE: [oletrucks] LED panel lights
RB's has some neat little brake, turn lights that go in the bed rolls at the
top of the AD trucks. I have them on my truck and they are great. Look
good, work well, and get lots of comments at the shows or just driving.
Andy Johns
1951 3100
Roswell, GA
-----Original Message-----
From: owner-oletrucks@autox.team.net
[mailto:owner-oletrucks@autox.team.net]On Behalf Of K Ohlgren
Sent: Sunday, May 18, 2003 10:26 PM
To: kruc@adelphia.net; oletrucks@autox.team.net
Subject: Re: [oletrucks] LED panel lights
Dave
I saw some led aux brake lites that might work for tail lites in the summit
cataloge. i just started my project and will be in need of different
tail/turn lites. these were 2x8 or 3x6 led units.
kurt (a hacker 2)
>From: "Dave" <kruc@adelphia.net>
>Reply-To: "Dave" <kruc@adelphia.net>
>To: <oletrucks@autox.team.net>
>Subject: [oletrucks] LED panel lights
>Date: Sun, 18 May 2003 00:29:36 -0600
>
>I got a couple good leads when I asked about LED taillights last month.
>Recently I've been wonder ing if I could replace all incandescent lights in
>the truck with LEDs. (For the peanut gallery, no, not the headlights.)
>Anyone done something like this yet? I was looking at the dome light and
>thinking I could put a couple rows of LEDs in there. I've already put a
>blue
>LED and 560 ohm resistor in parallel with the torque converter lockup, and
>red ones in parallel across the brake lights. I did that when I had a loose
>turn signal mechanism that wouldn't activate the brake lights if the lever
>wasn't centered, later it also let me know I had an intermittent brake
>switch. The high beam indicator and turn signal indicators would be easy to
>rig up, but are the available LEDs bright enough to light the gauges and
>deluxe heater panel? FWIW, I used a hole saw and cut openings in my panel
>and replaced the stock gauges with 2 1/16" electric Autometer gauges. Yes,
>I
>admit it. I'm a hacker.
>
>Dave '57 3100
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
_________________________________________________________________
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|