You might try PB Blaster or JB-80 instead of Liquid Wrench....I think they
are better. Let soak over night....some times if you tighten 1/16th of a
turn first it helps or put tension on your wrench then strike the wrench
with a hammer, this "shocks" the bolt.
Good luck!
Mike Boteler
'56 4400 Stake
'56 6400 Stake
'56 8400 Wrecker w/Holmes 525
'56 9200 Tractor w/Allison Automatic
'57 10500 Fire Truck
Hughesville, MD
----- Original Message -----
From: "mark treutelaar" <phoneman@ticon.net>
To: <oletrucks@autox.team.net>
Sent: Thursday, November 27, 2003 5:46 PM
Subject: [oletrucks] 47 panel truck
> I started dismantling my rusted panel truck today. I broke a few 1/2 "
bolts
> in the fire wall today . I soaked these good with liquid wrech for an
hour.
> What would be the best way to get bolts like these out . Heat from a torch
?
> Or soaking these down for several days before tyrying to remove the bolts
?
> Ill probably have to get these out with an easyout . Any help woulkd be
> appreciated Thanks Mark
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|