No need to use water, common method is to smooth up blasted area is dry sand
with 100 grit on your non directional body sander, clean and prime.
Lee
Prosser WA
----- Original Message -----
From: "Tom Cooper" <tntcoop@earthlink.net>
To: <oletrucks@autox.team.net>
Sent: Sunday, July 15, 2007 5:37 PM
Subject: [oletrucks] maybe insignificant
> This may be a non issue for some, but I am going to wet sand the top of
> my cab. I had it media blasted and that blasted away any sealer that was
> between the top and the drip rail. I will put more sealer in the drip
> rail before I spray the final coat of primer, but in the mean time, what
> is a good way to keep water from running underneath the top where it
> meets the drip rail?
> I know to use water sparingly and I thought about running some blue
> painters tape along the top edge to at least help keep any water out.
> Has anyone got any other ideas, or is this something that water can't
> get under anyway by just wet sanding?
>
> Thanks again for the help,
> Tom in SC
> 55 2nd
|