oletrucks
[Top] [All Lists]

Re: [Oletrucks] AD Frame Height

To: oletrucks@autox.team.net
Subject: Re: [Oletrucks] AD Frame Height
From: Leon Corley <lcorley2@att.net>
Date: Wed, 28 Apr 2010 23:38:45 -0500
According to Sect 3,Sheet 6 of the AD Assembly Manual,
the distance from the top of the frame to the top of the front axle at 
the spring seat should be 6 19/32".

According to this web site - 
http://chevy.oldcarmanualproject.com/chevyresto/54060.htm
The unloaded bed floor should be 27.75" above the ground with 6.00-16 tires.

regards,
Leon

oletrucks-request@autox.team.net wrote:
> Send Oletrucks mailing list submissions to
>       oletrucks@autox.team.net
>
> To subscribe or unsubscribe via the World Wide Web, visit
>       http://autox.team.net/mailman/listinfo/oletrucks
> or, via email, send a message with subject or body 'help' to
>       oletrucks-request@autox.team.net
>
> You can reach the person managing the list at
>       oletrucks-owner@autox.team.net
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Oletrucks digest..."
>
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/oletrucks/
>
> Today's Topics:
>
>    1. AD Frame Height (James Hays)
>    2. Re: AD Frame Height (Gale Gorman)
>    3. Re: AD Frame Height (Jon)
>    4. Re: AD Frame Height - SECOND SENDING (James Hays)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 27 Apr 2010 17:49:30 -0700
> From: "James Hays" <thomasind@nventure.com>
> Subject: [Oletrucks] AD Frame Height
> To: <oletrucks@autox.team.net>
> Message-ID: <7C8D480379124283B1C3722D1D43A06E@OwnerPC>
> Content-Type: text/plain; charset="us-ascii"
>
> Hi Gang:    Want to do some suspension checking / engineering - need a
> starting point for front & rear frame heights.
>
> Any relationship of extreme front & rear fenders height ( or frame ) relative
> to the ground & tire dia. would be great & if you think it is stock height or
> how much from stock height.
>
> Greatly appreciated,
> Jim
> 55-1st P U
>
>
> ------------------------------
>
> Message: 2
> Date: Tue, 27 Apr 2010 20:24:49 -0500
> From: Gale Gorman <gale_gorman@mac.com>
> Subject: Re: [Oletrucks] AD Frame Height
> To: James Hays <thomasind@nventure.com>
> Cc: oletrucks@autox.team.net
> Message-ID: <474B420A-77B9-4801-8896-2E665509FCFD@mac.com>
> Content-Type: text/plain; charset=us-ascii
>
> Wouldn't a good spring shop have the data on the arch for the springs? Here 
>in Houston there's an old shop on Canal St. that I'm sure would just put the 
>proper arch in the spring. Shop's name is Pruitt.
>
> A lot of factors come into play when you measure one truck against another:
> 1. rim size
> 2. tire size
> 3. amount of tread
> 4. amount of inflation
> 5. any loads front or rear
> 6. and the big one, is the ground surface flat and level
>
> I don't know if Chevrolet had a manual showing all that for '54 and '55 but 
>they did in later years. They published a manual showing every dimension you 
>could imagine for the frame and suspension. Companies that built after-market 
>beds had all this to ensure their stuff would bolt on.
_______________________________________________

Oletrucks@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>