> 1-9/16 is not a common
> shaft size (quarter inch above 1-1/2), which might be a problem.
Oops, good point. However, MMC also sells thin wall brass tubing with an
inside diameter of 1-9/16 and od 1-5/8. Might do, depending on how much
torque & vibration you need to handle.
If that won't do, I think you're going to have to wind up machining
something, either the shaft, or a bushing, or a coupling.
-- Randall
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|