shop-talk
[Top] [All Lists]

Re: [Shop-talk] historical machine shop question

To: shop-talk@autox.team.net
Subject: Re: [Shop-talk] historical machine shop question
From: Pat Horne <pat@hornesystemstx.com>
Date: Wed, 02 Mar 2011 18:17:30 -0600
Line shaft.

The central engine turned a shaft that had pulleys on it with belts down 
to each piece of equipment.

I had a 12" jointer made in the early 1920's that was set up for line 
shaft operation, a motor was an option.

Peace,
Pat

Thusly spake David Scheidt, On 3/2/2011 5:30 PM:
> Before the cheap electric motor, it was usual to run machines in a
> shop from a central engine (steam, water, hamster wheel) with a big
> endless belt running over head.  At each machine, a second belt
> carried power from the overhead to the machine's driven shaft.  Is
> there a general term for this sort of set up?
>

-- 
Pat Horne, Owner, Horne Systems
(512) 797-7501 Voice            5026 FM 2001
Pat@HorneSystemsTx.com  Lockhart, TX 78644-4443
www.hornesystemstx.com
-- We support Habitat for Humanity - a hand UP, not a hand OUT --
_______________________________________________

Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>