shop-talk
[Top] [All Lists]

Re: [Shop-talk] I give up! (almost) read >I know why pipe fitters

To: shop-talk@autox.team.net
Subject: Re: [Shop-talk] I give up! (almost) read >I know why pipe fitters
From: John Miller <jem@milleredp.com>
Date: Fri, 27 May 2011 09:02:53 -0700
On 5/27/2011 8:36 AM, Roland Wilhelmy wrote:
> So, is the moral of the story to leak test as you construct the air
> line?  Or install a lot of unions so you can get at that joint in the
> middle of the array without dismantling the whole thing?

Yes, if it's big enough to worry about leakage, pressure test it in 
segments as you go.

You can find some truly amazing threads in some of the iron pipe 
fittings in the stores these days.

When I did the plumbing on our house a few years back, I didn't have a 
pipe threader (the water and compressed air piping is copper, but the 
gas is iron.)

Fortunately OSH is only three minutes away.

Unfortunately the guy out back running the pipe threader was new and had 
no clue what he was doing.

Fortunately, he responded well to suggestions.

John.
_______________________________________________

Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>