I suggest:
1: Clean real well with solvent.
2: Paint over w/ black epoxy paint (brush or spray).
3: Wait until semi-dry, then wipe off excess with cloth lightly dampened
with thinner.
Doug
On Wed, Sep 24, 2014 at 12:58 PM, Peter J. Thomas <pj_thomas@comcast.net>
wrote:
> I have a lot of various sockets and wrenches that have stamped markings
> which are hard to read when your under the car with low lighting. I
> wondering if anyone has "blackened" their tools to make the markings more
> readable, similar to the etched easy to read sockets. I was thinking
> either use liquid electrical tape or gun blueing. Not sure either would be
> durable on a chromed tool. Has anyone done this?
>
> Peter T.
> _______________________________________________
>
> Shop-talk@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/doug@
> dougbraun.com
_______________________________________________
Shop-talk@autox.team.net
Archive: http://www.team.net/archive
|