spridgets
[Top] [All Lists]

Re: Release Assembly

To: Chuck Ciaffone <chuckc@ibm.net>
Subject: Re: Release Assembly
From: Ulix Goettsch <ulix@u.washington.edu>
Date: Tue, 9 Dec 1997 09:45:09 -0800 (PST)
Cc: spridgets@Autox.Team.Net, Rivergate@compuserve.com
In-reply-to: <348D80F7.76A1@ibm.net>
Reply-to: Ulix Goettsch <ulix@u.washington.edu>
Sender: owner-spridgets@Autox.Team.Net
Sounds right, Chuck.
Ulix

On Tue, 9 Dec 1997, Chuck Ciaffone wrote:

> Thanks for all the help on the clutch disk; it's
> in right now.
> 
> I would just like to reaffirm my ordering of the release mechanism:
> 
> 1. First the fork goes on its pivot.
> 2. Then the carrier slides on, bearing to the front. The
>    clutch fork fingers now press on the back of the carrier ears.
> 3. The return springs sit in the small (real shallow!) depressions
>    on the fronts of the ears on the carrier.
> 
> Right?  I hope.
> 
> chuck
> -- 
> =====================================================
> 
> chuck ciaffone chuckc@ibm.net
> 

    Ulix                                                    __/__,__        
.......................................................... (_o____o_)....
                                                           '67 Sprite


<Prev in Thread] Current Thread [Next in Thread>