Re: Oil cooler fit & cleaning

[Trevor Boicey <tboicey@brit.ca>]

CONAN@RALVM8.VNET.IBM.COM wrote:
>   Assuming a good quality oil filter, if it's plumbed upstream of the
> cooler it should keep the ickybits from getting to the cooler in the
> first place.

  I suspect a cooler would not be a good place to get a lot
of grime either. Depending on the diameter of the passages, it
might start to clog up and starve the engine.

> plumb a good filter downstream of it.

  That might be tough. 

-- 
Trevor Boicey, Ottawa, Canada.
tboicey@brit.ca, http://www.brit.ca/~tboicey/
[ Seeking some miscellaneous MG parts, see the list on the web page... ]