spridgets
[Top] [All Lists]

Re: Timken Tapered Bearings Dimensions

To: "Peter Samaroo" <mrbugeye@hotmail.com>, spridgets@autox.team.net
Subject: Re: Timken Tapered Bearings Dimensions
From: Peter <nosimport@mailbag.com>
Date: Thu, 12 Nov 1998 13:09:19 -0800
In-reply-to: <19981112151751.15512.qmail@hotmail.com>
Reply-to: Peter <nosimport@mailbag.com>
Sender: owner-spridgets@autox.team.net
Here's some pertinent info.
        excuse the length. All this should be on 1 page.
At 07:17 AM 11/12/98 -0800, Peter Samaroo wrote:
>Hi Larry
>I was one of the ones that asked I found this info out from Timken.
>Could not find the dimensions on the stock bearings.
>--------------------
"Stock" bearing data. R&M Ransome and Marles
        Inner   34/LJT25  (light metric thrust)
                bore: 25mm = .9843  OD 52mm = 2.0472  Width 15mm = .5905
        Outer   3MJT17  (medium metric thrust)
                bore  17mm = .66929 OD 47mm= 1.8504 Width 14mm = .55118
At first flush it would seem that if you use Timken style roller bearings
that their greater width would require shortening the distance piece rather
than shimming it. I dunno, but this is food for thought anyhow.
Peter C
>------------------- 
>>From the Timken Catalog:
>Sprite: ball bearing
>FRONT WHEEL
>Year    Desc.     Seal No.   Bearing No.
>58-71   inner      471192       7205
>58-71   outer                   7303
>
>Sprite: roller bearing conversion
>58-71   inner      471192       30205
>58-71   outer                   30303
>
>
>Sprite   REAR WHEEL
>Year     Desc.    Seal No.     Bearing No.
>58-70             472164        207
>
>
>Sprite Mk. IV CLUTCH RELEASE - ball bearing design replaces original 
>style carbon bearing
>Year     Desc.    Seal No.     Bearing No.
>66-72                           AU1715C
>
>Here are the Dimensions.
>inner
>30205 bore:0.9843, OD:2.0472, Width:0.6398, C90lbf:1840, Kfactor 1.56
>outer
>30303 bore:0.6693, OD:1.8504, Width:0.6004, C90lbf:1770, Kfactor 2.05
>
>inner
>07097 Bore:0.9843, OD:2.0470, Width:0.5910, C90lbf:1570, Kfactor 1.45 
>outer
>05066 Bore:0.6690, OD:1.8504, Width:0.5662, C90lbf:1440, Kfactor 1.64
>
>I do not know what C90lbf or Kfactor means, I assume its some sort of 
>strength rating.
>
>Reagards,
>Peter S.
> 
Peter Caldwell
1 very rough Innocenti
(the Sprite with an accent)
among other LBCs and 4WDBCs
Contact for: The Columbia County Bonspiel
        Curling on 13 sheets @ 5 clubs in WI
        Feb 5 - 7 1999

<Prev in Thread] Current Thread [Next in Thread>