Crash,
I truly hope that you offer this prose in jest.
If not, NOAEFIDOUHOUNREOWNONAOS!!! ???
Jay Fishbein, CT
AN-5
HAN-6
Innocenti-S
On 02/11/99 23:47:44 you wrote:
>
>Glenn, You have three choices on replacing the rear seal. You can
remove the seat, cut a big hole in the side of the transmission tunnel
replace the seal and cover the hole with a flatened tin can ( this was
done on my parts Midget). You can also cut a
>hole underneath the car on the pan to get room to replace the seal, or
for the last choice you can pull the motor and trans and do it right
unless you have a friend thats reall skinny with arms around 6 ft long
in which case he can just reach up the tunne
>l from the back and do it.
> Crash
>
>
>
|