spridgets
[Top] [All Lists]

Re: Sprite and Midget Tuning Video

To: Paul A Asgeirsson <pasgeirsson@juno.com>
Subject: Re: Sprite and Midget Tuning Video
From: Rick <rickfisk@concentric.net>
Date: Tue, 30 Mar 1999 19:09:51 -0500
Cc: emakris@hol.gr, spridgets@autox.team.net
References: <4494b7cf.36ffdd49@aol.com> <3700D56A.1000@hol.gr> <19990330.063451.7655.0.PAsgeirsson@juno.com>
Reply-to: Rick <rickfisk@concentric.net>
Sender: owner-spridgets@autox.team.net
The tape was made with "Macrovision" copy protection, so you'll need a
Macrovision wiper to successfully copy it.

Rick

Paul A Asgeirsson wrote:

> I can copy the tape if it were sent to me.  Sending a tape to Turkey is
> inexpensive.  Just $6.95 US for 3-5 day service. Address below.
>
> Paul Asgeirsson
> Morriservice
> 9123 N Clarendon Ave
> Portland OR 97203-2750
> 503-978-3998
> PAsgeirsson@juno.com
>
> On Tue, 30 Mar 1999 15:45:14 +0200 "Evangelos G. Makris" <emakris@hol.gr>
> writes:
> >My VCR (and TV set) can play all systems, including American ones.
> >I know because they say so in the manuals and I've tried it
> >quite a few times with no problem whatsoever (the SU tape
> >was in NTSC - plays just fine).
> >
> >So, if anyone can copy the tape and mail it to me, let me know.
> >
> >Evangelos
> >
> >
> >Daniel1312@aol.com wrote:
> >>
> >> In a message dated 29/3/1999  11:42:09AM,  emakris@hol.gr writes:
> >>
> >> Hi Evangelos,
> >>
> >> You might find the video will not work in your VCR.  Certainly there
> >are
> >> differences between USA VHS and English VHS - the tapes fit and play
> >but all
> >> you see is 'snow'.   Some modern VCRs have a switch to allow them to
> >use
> >> either formats and some shops can copy a USA tape so it plays in the
> >UK - a
> >> point you might want to check out.
> >>
> >> Daniel
> >

--
Bugeye on TEN
X-Treme Motorsports
NIS League Member
Sponsored by Thomas Enterprises
Makers of the TSW and TSW II Wheels
Sponsored by Beech Ridge Motor Speedway

http://www.thomas-superwheel.com
http://www.beechridge.com



<Prev in Thread] Current Thread [Next in Thread>