Ridge reamer

[Ronsoave@aol.com]

Anyone know who sells a cylinder ridge reamer that'll do a std 948 Bore (2.47 
inches)?  The locals around here go from 2 11/16 (ok for 1275) and up.  I had 
too many leftover jellybeans the other night and accidentally took apart an 
engine in a sugar rush.  Someone at work suggested using a honing tool but I 
KNOW that would:

a) take years to finish, if at all
b) overheat the crap out of the cylinder and distort it permanently
c) destroy the tool