spridgets
[Top] [All Lists]

Re: LONG, Update to Fulcrum Pin, '79 Midget

To: Lancer7676@aol.com
Subject: Re: LONG, Update to Fulcrum Pin, '79 Midget
From: Ulix Goettsch <ulix@u.washington.edu>
Date: Tue, 1 Jun 1999 08:15:19 -0700 (PDT)
Cc: pixelsmith@gerardsgarage.com, richard.arnold@juno.com, spridgets@autox.team.net
In-reply-to: <a498170.2485113b@aol.com>
Reply-to: Ulix Goettsch <ulix@u.washington.edu>
Sender: owner-spridgets@autox.team.net
On Tue, 1 Jun 1999 Lancer7676@aol.com wrote:

> functional but worn--and required replacement.  AND they must be melted or 
> heated out of place and the new ones soldered in with the new fulcrum pin IN 
> PLACE to assure alignment.  Whew!   Any way you go about it this is still one 

David,
I would not solder the bushings with the new pin in place as the heat may
damage the pin.  Use a good old one if you have one or buy three.  :-) 

    Ulix                                       __/__,__      ___/__|__  
..............................................(_o____o_)....<_O_____O_/...
                                              '67 Sprite     '74 X1/9


<Prev in Thread] Current Thread [Next in Thread>