spridgets
[Top] [All Lists]

Re: My baby's back! - Gear reduction starters

Subject: Re: My baby's back! - Gear reduction starters
Date: Fri, 21 Jan 2000 11:53:43 -0800 (PST)
Cc: spridgets@autox.team.net
Everyone,

Thanks for your input on the GR starters. I've ordered one from Paul, who 
definitely had the best price.

Thanks again,
Bryan Vandiver (59-bugeye)
San Jose,  CA


>To: "Jeff Boatright" <jboatri@emory.edu>, "Bryan Vandiver" 
<Bryan.Vandiver@eng.sun.com>
>Cc: <spridgets@autox.team.net>
>Subject: Re: My baby's back! - Gear reduction starters
>MIME-Version: 1.0
>Content-Transfer-Encoding: 7bit
>X-Priority: 3
>X-MSMail-Priority: Normal
>X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6600
>
>I think Paul Asgiersson has them cheaper (don't quote me). Paul, are you
>there?
>
>
>----- Original Message -----
>From: "Jeff Boatright" <jboatri@emory.edu>
>To: "Bryan Vandiver" <Bryan.Vandiver@Eng.Sun.COM>
>Cc: <spridgets@autox.team.net>
>Sent: Tuesday, January 18, 2000 2:20 PM
>Subject: Re: My baby's back! - Gear reduction starters
>
>
>> Bryan,
>>
>> I am thinking of doing a 5 speed conversion, too. There are two kits
>> available, one from Rivergate (rivergate5speed.com) and the other
>> from Morriservice (Paul Asgierson from this list -
>> PAsgeirsson@juno.com).
>>
>> Anyway, I contacted WInner's Circle about the GR starters - they are
>> asking $229 for them. A little rich for my blood. Let us know if you
>> find a cheaper source.
>>
>> Jeff
>>
>> At 1:56 PM -0800 1/18/00, Bryan Vandiver wrote:
>> >Hello everyone,
>> >
>> >I finally got my bugeye back yesterday from it's 3-month stint back
>> >at the body
>> >shop!  Of course it was raining, and I don't have the top fitted yet
>> >;-) Some of
>> >you may remember, it had an unfortunate encounter with a Ford F150,
>> >only 4-days
>> >after the Palo Alto British car show, after I had just finished my
>restoration
>> >:-(
>> >In any case it's safe in my garage again, and ready to go:-)
>> >I getting ready to do the Rivergate 5-speed conversion, and I was
>wondering if
>> >anyone has experience with one of the 'Gear Reduction' starters
>available??
>> >I was thinking of getting one, so I can avoid cutting the bell housing
>on the
>> >new tranny to accommodate the 'stock' starter.
>> >
>> >Thanks,
>> >Bryan Vandiver (59-bugeye)
>> >San Jose, CA
>>
>>
>> Jeffrey H. Boatright, PhD
>> Assistant Professor, Emory Eye Center, Atlanta, GA, USA
>> Senior Editor, Molecular Vision, http://www.molvis.org/molvis
>> Mailto:jboatri@emory.edu
>>
>>
>


<Prev in Thread] Current Thread [Next in Thread>