Re: Rear Axle Seal, et al.

In a message dated 4/3/2000 2:19:53 PM Eastern Daylight Time, 
woodrat@spacey.net writes:

<< what
 is the right way to remove the axle seal from the hub?  >>

I like to use a Scotch Brite pad to remove gasket and seal residue and 
material from metal, such as engine surfaces and hubs.  You can get a Scotch 
Brite kit that fits into your electric drill and will polish the material 
right off the metal without scoring the surface.

--David C.