spridgets
[Top] [All Lists]

Re: Bugeye floormats

To: "Mike Maclean" <macleans@earthlink.net>
Subject: Re: Bugeye floormats
Date: Mon, 1 May 2000 09:02:17 -0400charset="iso-8859-1"
Cc: "spridgets list" <spridgets@autox.team.net>
I couldn't have said it better!!  Some people want a nice looking car but
don't mind if it's not "authentically" restored, and most people wouldn't be
able to tell the difference; but then there are those who want the
restoration to be authentic, right down to the markings on the bolts, etc,
and they would not be happy if they had a car that was perfectly restored to
concours judging standards, but with carpets instead of rubber mats on the
floors, even if they still could get a gold reward with this combination.
To each his own.

Bob
-----Original Message-----
From Mike Maclean <macleans at earthlink.net>
To: Michael Lupynec <mlupynec@globalserve.net>
Cc: RESTOGUY1@aol.com <RESTOGUY1@aol.com>; Spridgets
<spridgets@autox.team.net>
Date: Sunday, April 30, 2000 11:13 PM
Subject: Re: Bugeye floormats


>Color trunk hardura (I got red for mine) and the correct pebble finish
>gray cardboard trunk side panels are available from Winner's Circle.
>They also sell the hardura hump and wheel well covers in color.  I also
>got Schrader tire valves from of all places, a Winston Tire store.  Of
>course, they don't sell the correct valve caps.  British Tool & Fastener
>sells British UNF bolts in many sizes.  Unless you are concerned that
>each and every bolt head reads correctly(do you or the judges know?)
>these bolts have the circular depression on top(a British marking to
>show a fine thread).  I got my crimped working tach drive from the same
>guy I bought my car from.  He buys, sells and restores Austin Healeys
>and Italian cars.  He had a big mayonnaise jar full of them!  Some
>worked some did not.  He traded a reproduction unit for mine.  Most of
>his customers don't know the difference or care.  Most people don't show
>their cars, and the people that see them on the highway don't know the
>difference either.  My point is, you can find this stuff, but don't give
>up looking just to justify the carpeting on the floor.  You're either
>making a concours car or your not.  I'm going to Buttonwillow next
>weekend.  They are having a swap meet on Saturday.  Who knows what I
>will find?  Maybe even a Tudor wash bottle with a 1" neck.
>Mike MacLean-60 Sprite
>
>Michael Lupynec wrote:
>
>> Here's my 2c,
>>
>> Original Bug tunnel cover is not to be had except if u are licky
>> enough to find vgc one second hand.
>>
>> On my concours Bug I have resolved to take a 10 point flat
>> originality penalty for having a matching color Mark II carpet set
>> @ $209.95 from Moss.  This is a very  reasonable 1% deduction, and
>> IMHO has the benefit of having a much nicer looking interior.
>>
>> I am not sure I would spend a big buck to go back to those (IMHO)
>> flimsy, ugly, poor fitting, rubbermaid style floor mat sets.
>>
>> I spend the money where I get the biggest point benefit per dollar
>> spent - and on the early Bug there are lot's of other hurdles that
>> are going to cost u time, effort and money. For e.g. try to find
>> an early style 1 inch opening Tudor washer bottle, an operating
>> crimped tach drive, - original tire valves, tool bits, bolts &
>> screws & clamps, battery tray, spark plug brass connectors, -
>> correct non Moss air duct, color trunk hardura, trunk side panels.
>> I could go on, but do not wish to bore the practical sided
>> listers.
>>
>> If u do the rest of the car to C-spec u will effectively be marked
>> out of 99 points and still have another 4 to lose before u slip
>> from gold into silver.
>>
>> Mike L.
>> 60A,67E,59Bug
>>
>> ----- Original Message -----
>> From: <RESTOGUY1@aol.com>
>> To: <Healeys@autox.team.net>
>> Sent: April 30, 2000 9:31 AM
>> Subject: Bugeye floormats
>>
>> >
>> >    We are currently restoring a early Bugeye to , hopefully ,
>> concours specs.
>> >  A problem has  arisen pertaining  to availiabilty of correct
>> floomats .
>> >      Does anyone on the list know of  anyone making proper mats
>> ?
>> >  Is there enough interest to warrent having a small run of them
>> made ? There
>> > are manufaturers who will do limited runs ,but the price can be
>> stunning.
>> >     Anyhow  ,what does the collective wisdom of the list  have
>> to say about
>> > the subject .  Any input would be helpful and appreciated
>> >
>> >
>> TIA
>> >
>> Jerry
>> > Hoeppner
>> >
>> > Restoguy1@aol.com
>> >
>


<Prev in Thread] Current Thread [Next in Thread>