Thanks for the suggestions. I had already checked for spark at the
plugs ... all good. Plug wires are lined up properly on the cap, with
#1 at TDC, and the rotor pointing to #1 plug wire. Elec fuel pump works
great, fuel getting to carbs without problems. Points set with correct
gap and spark there. Realigned the distrib and drive with timing marks
set and #1 at TDC ... was off by a click, but is correct now.
Still wants to start, but isn't ..... will recheck for spark and
replace the rotor button this morning and see what happens. Will also
check the earth strap .... hadn't done that yet.
Sue
|