----- Original Message -----
From <John.Deikis at med.va.gov>
To: <dmeadow@juno.com>; <chuckc@attglobal.net>
Cc: <John.Deikis@med.va.gov>; <spridgets@autox.team.net>
Sent: Tuesday, August 14, 2001 9:26 AM
Subject: RE: Crankshaft Pulley Bolt
> That's the next problem. Without being able to wedge something
> against the crankshaft or lock the flywheel, I don't think I can get 70
lbs.
> ft. of torque onto that bolt. Guess I'll have to drop the sump (again)
> unless somebody has a good idea.
> -John
I used the biggest pair of slip joint pliers that I got a Sears. $40. They
fit around the damper. You can brace them against the frame and get 70 lbs
easy.
Good luck
Roger Cotting
|