spridgets
[Top] [All Lists]

Re: Tying down the battery

To: Ajhsys@aol.com, mgagne@unc.edu, spridgets@autox.team.net
Subject: Re: Tying down the battery
Date: Thu, 23 Aug 2001 20:30:01 EDT
In a message dated 8/23/2001 10:00:50 AM Eastern Daylight Time, 
Ajhsys@aol.com writes:


> I bought J-bolts from an Exide battery display at K-mart.  I made a cross 
> piece out of angle iron

I thought about this, but the way the battery is situated in the 1500, with 
the posts to the front, the angle IRON comes awfully clost to the posts, and 
I am afraid the angle iron will short circuit the battery.  Be nice if they 
made a non-conductive angle that could be used in place of the iron.  I have 
no battery tie-down presently either.

--David C.

--David C.



<Prev in Thread] Current Thread [Next in Thread>