Drain
> some oil from the rear housing or be prepared for
> some oil to drip out at
> least one side when you pull the axles. You should
> replace the rear seals
> and you'll need new gaskets and O-rings while you
> have things apart too.
>
You don't have to drain any fluid from the diff as
the small amount that drains from the hub is actually
contained in the hub and bearing so that the bearing
always has some oil when the car is started. Also
remember when installing new bearings to put some axle
grease in them or you will be running on dry bearings
when you first start out on your drive.
Bob
Yahoo! Sports - Coverage of the 2002 Olympic Games
http://sports.yahoo.com
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|