Re: Too fast

That might work, but I'd be worried about mangling the hub or bearing 
in the process.

> 
> if you can get the flanges 1/2 to 3/4 inch apart, you can put bolts 
through the holes, nuts between the flanges and tighten them in an 
alternating pattern and push the axle out... can't you?

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/spridgets