Now does anyone have the dimensions of a down-flow for comparison?
The specialty stuff is real pricey compared to the mass produced stuff
for the mini and if it works why not. Also turning a down-flow into a
closed system is also a consideration and not that hard to do.
Spike
----- Original Message -----
From <JMCarter49 at aol.com>
To: <bigfigg@earthlink.net>; <spridgets@autox.team.net>
Sent: Saturday, November 23, 2002 8:45 AM
Subject: Re: Radiator Choses
> In a message dated 11/23/02 8:09:39 AM Pacific Standard Time,
> bigfigg@earthlink.net writes:
>
> > Mini radiator into a spridget: I was curious as to the dimensions
of
> > a mini radiator as compared to a spridget down-flow. There are
> > several comp. or S type radiators available and wondered if the
swap
> > was feasible? From pictures it looks as if this swap is a
> > possiblitiy.
> >
> >
>
> Say roughly, 16" tall (bottom to top of radiator cap), 11" wide, and
2"
> thick. Now the 4-core will be a little thicker, the super cool two
core a
> little thinner. But then why aren't you looking at the speciality
stuff for
> the Spridget such as the trick Aluminium stuff designed for the
application.
> The other why would be are you experiencing an overheating problem?
> John
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|