spridgets
[Top] [All Lists]

Re: Re: Diff Cover Torque Setting?

To: "Mike/Donna Carpenter" <mail4carpenters@peoplepc.com>, "chuck" <cciaffone@earthlink.net>, "spridget list" <spridgets@autox.team.net>
Subject: Re: Re: Diff Cover Torque Setting?
Date: Tue, 17 Aug 2004 21:45:26 +0000
Snug with a 3/8" ratchet :-)

(At least that what I do.)



From "Mike/Donna Carpenter" <mail4carpenters at peoplepc.com>
Date: 2004/08/17 Tue PM 09:25:25 GMT
To: "chuck" <cciaffone@earthlink.net>, 
        "spridget list"
  <spridgets@autox.team.net>
Subject: Re: Diff Cover Torque Setting?

Hi Chuck,

I believe the studs are 5/16 in. and I usually put the torques at about 22
lb.ft. per the torque settings given by Lotus Engineering.

I hope this helps!

Mike Carpenter
----- Original Message -----
From "chuck" <cciaffone at earthlink.net>
To: "spridget list" <spridgets@autox.team.net>
Sent: Tuesday, August 17, 2004 12:51 PM
Subject: Diff Cover Torque Setting?


> Can't seem to find a torque setting for when slipping the
> diff back into it's axle shell -- 8 bolts, about 1/4" diam.
> Something like 20 ftlbs too much??
>
> chuck

Check out the new British Cars Forum:
http://www.team.net/the-local/tiki-view_forum.php?forumId=8





<Prev in Thread] Current Thread [Next in Thread>