Re: Master cylinder bore: when do you throw in the towel?

At 03:54 PM 3/9/2005, Dan Gillitzer wrote:
>How much pitting do you dare allow? I can see some pitting, pretty shallow,
>after about 1 minute of honing per hole. Mainly on the "clutch side", between

  I see in your next post that you have decided to sleeve it, probably a 
good idea.  If its so minor that it does not leak its ok to use. but the 
problem is that is that it will cause premature damage to the seals by 
constantly rubbing on the seals and you will have to rebuild it again soon.

         Mike