spridgets
[Top] [All Lists]

Re: re-torque cyl heads

To: Alan Taylor <atenglish@mindspring.com>,Randall <ryoung@navcomtech.com>, fot@autox.team.net
Subject: Re: re-torque cyl heads
From: EDWARD BARNARD <edwardbarnard@prodigy.net>
Date: Fri, 8 Apr 2005 14:13:24 -0700 (PDT)
Delivered-to: mharc@demo.fatchancegarage.com
In-reply-to: 6667
Reply-to: EDWARD BARNARD <edwardbarnard@prodigy.net>
Sender: owner-fot@autox.team.net
The TR7 was an interesting animal when it came to head torques. I've counted 
five different "factory" methods to torque the head. Three bulletins were put 
out changing either the spec or the method of tightening them. At the end of 
production the spec was for a re-torque at the 1000 mile service, and you were 
to loosen the bolts before re-tightening them. That method seems to be the 
final one that they settled for, and I'm not sure if it was that or the 
increase in quality control and changing of the factory that made it more 
reliable. Thanks - Ed

Alan Taylor <atenglish@mindspring.com> wrote:When I worked at the British 
Leyland dealer in the later seventies , I
PDI'ed (pre delivery inspection) countless TR7s . Without exception some of
the head bolts would be almost finger tight. I would torque them to spec and
when it came back to me for it's 1000 mile service I would re-torque again
and most of the time it was obvious that it needed it.

Alan T




----- Original Message ----- 
From: "Randall" 
To: 
Sent: Friday, April 08, 2005 9:00 AM
Subject: RE: re-torque cyl heads


> > It's been done on at least some post-war cars ... the owner's manual for
my
> > 59 TR3A has it listed as a maintenance item. ISTR my 71 Stag does too.
>
> I checked, the 71 Stag's owner's manual has it listed as part of the
"free" 1000
> mile service.
>
> Randall

<Prev in Thread] Current Thread [Next in Thread>