spridgets
[Top] [All Lists]

Re: Sway bar pics??

To: Lester Ewing <lewing@sport.rr.com>
Subject: Re: Sway bar pics??
Date: Mon, 25 Jul 2005 16:24:05 -0700
Cc: spridgets <spridgets@autox.team.net>
References: <7A916AE4-12B3-479D-B239-F0E8733ABDDA@sport.rr.com>
Hello Lester,

       if you reach up kinda behind the a arm you should be able to
       feel a lump, bump, hump in the casting.. if you take the
       mounting plate and put it there you will find that there is
       really only one place where the three bolt hole pattern will
       fit properly... you can be off a little, but you'll get the
       idea...when you reach up behind.. also, you stand a good chance
       of weakening the arm if you don't put a back plate up inside
       the arm for the bolts to go through... i made a pattern with a
       piece of paper, then card stock, then 1/4" steel plate to fit
       up in there... i have ONE spare metal one that i can send if you
       need it...




-- 
Best regards,
 Bill                            mailto:pythias@pacifier.com
   "66 Sprite





<Prev in Thread] Current Thread [Next in Thread>