spridgets
[Top] [All Lists]

Re: [Spridgets] Hello and Kingpin bushings?

To: Daniel1312@aol.com
Subject: Re: [Spridgets] Hello and Kingpin bushings?
From: Larry Macy <lmacy@phillymgclub.com>
Date: Fri, 8 Jun 2007 08:32:28 -0400
Sorry Daniel, It is the Really Real, Real, Larry that has that  
conversion.

And I love it. Would never go back.

There is a company in CT that sells the conversion, but I had it  
shipped from England for less $$. It took a long weekend to get it in,  
but a lot of the extra time was chasing an engine (Don't ask). You use  
the standard 1500 bell housing and if you ever want to go back, you  
will need the little tube thingy in the center as it has to be cut to  
fit the 5 speed. It also uses standard 1500 clutch parts.

The Really Real, Real, Larry

On Jun 8, 2007, at 3:27 AM, Daniel1312@aol.com wrote:

> One of the Larry's (not the real one) has a Ford type 9 in a 1500.   
> there is
> an aluminiun adaptor plate that bolts the box to the standard bell  
> housing.
>
> Daniel1312
>
> In a message dated 08/06/07 04:49:52 GMT Daylight Time,
> PAsgeirsson@worldnet.att.net writes:
>
>
>> You're right, Hal.  Not for the 1500 '79.  The Brits have a kit  
>> available,
>> but it doesn't use the Datsun 5 speed.  Seems to me someone on the  
>> list did
>> that conversion.  Back on the East coast as I recall.
>


-- 

Larry Macy
78 Midget

Keep your top down and your chin up.

Larry B. Macy, Ph.D.
macy@bbl.med.upenn.edu
Senior IT Program Director
Neuropsychiatry Section
Department of Psychiatry
University of Pennsylvania
3400 Spruce St. - 10 Gates
Philadelphia, PA 19104

  Ask a question and you're a fool for three minutes; do not ask a  
question and you're a fool for the rest of your life.
_______________________________________________

Edit your replies

http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>