spridgets
[Top] [All Lists]

Re: [Spridgets] Rust (Pardon if I digress to LEC stuff)

To: b-evans@earthlink.net
Subject: Re: [Spridgets] Rust (Pardon if I digress to LEC stuff)
From: "K. Valentine" <kevin@valentinephoto.net>
Date: Sun, 18 Nov 2007 09:55:50 -0500
Buster,

After you clean the parts in the electrolytic tank, use a Brillo pad  
to scour them off and then rinse them well with warm water.  The soap  
in the pads will leave a slight coating on the metal (even after you  
rinse all the soap off) which will keep them from re-rusting for  
about a month (or longer).

Kevin V.



On Nov 17, 2007, at 11:16 PM, Robert Bruce Evans wrote:

> If I may go off-current topic for a moment with an LEC problem/ 
> question, I have some parts and some tools from which I need to  
> remove rust;  some of it bad, some not-so-bad.   Some of them have  
> "interiors" that do not lend themselves to sandblasting.  I have in  
> my "tech tip" file an electrolytic rust removal process that I have  
> used successfully in the past (including parts in a 55 gallon  
> plastic barrel).
> My problem:  I do not know from whom I picked up this tip, and I do  
> not remember how to prevent the quick "re-rusting" that takes place  
> so quickly.  I know that I used a spray of some kind, but I don't  
> remember what it is.
> Can anybody help?
> Buster Evans
> _______________________________________________
> kevin@valentinephoto.net
>
> Edit your replies
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
_______________________________________________

Edit your replies

http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>