spridgets
[Top] [All Lists]

Re: [Spridgets] Vaccum Advance..

To: <bilbostuufff@yahoo.com>
Subject: Re: [Spridgets] Vaccum Advance..
From: "Chris King" <cbking@alum.rpi.edu>
Date: Mon, 3 Dec 2007 16:27:54 -0800
John,
 
Haynes is OK for most stuff, but for this emissions detail, I find it
falls short. You really need to get the Bentley reprint of the factory
manual. Moss, VB, and several vendors on this list can hook you up.
 
Now, if your '79 is still pretty much stock, the vacuum can on the
distributor is actually a vacuum RETARD, not advance. What it does is
retard the timing for better emissions.  This si why the timing spec for
the late 1500 is 2* ATDC.
 
That said, the first thing to do is make sure the components involved
are actually working. After all this time, the EGR valve could be choked
with carbon, and the vacuum umit on the dizzy may have a split
diaphragm. Apply vacuum to the EGR and see if the diap[hragm/needle
moves. Same with the dizzy, though you'll have to openit up to see if
the arm from the vacuum retard unit moves.
 
I've attached for you (the list won't get it) a scan of the emissions
hose page for a '79 California Midget - it should be closer to what you
need. It's out of the Bentley book.
 
DO you have to get your car through an emissions inspection? If not, you
may want to just remove any inoperative components. We can help you out
with that if you want to go that rpute.
 
Hope this helps.
 
-=Chris


Chris King
http://home.comcast.net/~kvcbk/ 

 <-----Original Message----->

                 From: John Colclasure [bilbostuufff@yahoo.com]
Sent: 12/3/2007 5:59:24 PM
To: spridgets@autox.team.net
Subject: [Spridgets] Vaccum Advance.. 

Ok, folks, got a book, although it seems a bit worthless in most
questions perhaps someone can answer this question. The Midget is a
1979...In the Haynes Repair Manual an illustration shows the Flame trap
line going from the distirbutor vacuum unit to the Exhaust gas
recirculation unit...However, for some reason I have no line going going
to the distributor vaccum Unit..(Nothing attached)...and a line going
from the Exhaust gas recirculation unit to a spout of the carberator....
When I examine the illustration it shows a line going out of the
carburator to someplace that is not shown in the picture...The car seems
to get very jerky when going down the road especially at low rpns...(I
am thinking this could be the lack of connection with the vaccum advance
Unit....Any ideas? 


--------------------------------- 

[demime 1.01d removed an attachment of type image/jpeg which had a name of 
79emission.jpg]
_______________________________________________

Edit your replies

http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>