spridgets
[Top] [All Lists]

Re: [Spridgets] 295 head content

To: Ron Soave <soavero@yahoo.com>
Subject: Re: [Spridgets] 295 head content
From: Robert Weeks <lists@woozy.com>
Date: Sun, 23 Mar 2008 20:07:32 -0400
There is a pretty good video from University Motors on you-tube showing 
how to do this:

http://youtube.com/watch?v=OGuOMItsCXk

Robert

Ron Soave wrote:
> --- Jack Laird <jlaird237@cox.net> wrote:
>   
>> The question is how much decking to keep the
>> cylinder volume about the same or
>> a bit less so the compression is just a bit higher.
>> What do I need to tell my head guy needs to come
>> off
>>     
>
> Jack,
> I would not rely on a predetermined amount - it's much
> safer and easy to just do the math or have the
> machinist do it:
>
> To get a decent idea, you need 5 key volumes which add
> the unswept volume, plus cylinder swept volume:
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>