[Top] [All Lists]

[Spridgets] How to press bearing into doublebearing hub

To: Spridgets <spridgets@autox.team.net>
Subject: [Spridgets] How to press bearing into doublebearing hub
From: Mike/Donna Carpenter <mail4carpenters@peoplepc.com>
Date: Thu, 3 Apr 2008 14:47:34 -0400 (EDT)
I hope that all is most excellent with everyone.

I have all of the bearings that I need now to install in the doblebearing hubs. 
 A big thanks to all that helped.  

I have a few more quick questions that I am sure you all will have an answer 
to.  Before you press the bearings in place, do you put any kind of lube around 
the bearing outer shell so that it slides into place easier?

What is the orientation of the inner seal that has to be pressed in last?  I 
really don't know how to explain it orientation-wise.  I hope one of you will 
know what I am referring to.  The seal has a smooth complete face and the other 
side has the seal itself somewhat visible.

Thanks for any and all help.

Mike Carpenter

PeoplePC Online
A better way to Internet
Support Team.Net  http://www.team.net/donate.html



<Prev in Thread] Current Thread [Next in Thread>