If you don't want to change the piping to the slave, stick
with the early.
The 1275 slave requires a rubber hose and a 1/4" pipe feeding it...
and an adapter somewhere in between master and slave.
At 12:04 PM 4/17/2008, Dean Swanson wrote:
>I am putting a 1275 engine and trans into a '62 mkII Sprite.
>Will the '58-'66 slave cylinder work or am I better off using the '67-'74
>I know which ever I use I will probably have to fiddle with the slave
>cylinder rod length.
>'62 A.H. Sprite mkII
Support Team.Net http://www.team.net/donate.html