[Top] [All Lists]

[Spridgets] [Fwd: Re: BE Fuel Sending unit]

To: spridgets@autox.team.net
Subject: [Spridgets] [Fwd: Re: BE Fuel Sending unit]
From: "Maxime Slegers" <max@maxengland.com>
Date: Tue, 22 Apr 2008 17:46:24 +0200 (CEST)
Hello everyone,

My midget mkIII fuel gauge reads half all the time when the ignition is
on. I've seen many posts talking of a full gauge when tank is empty and
vice-versa, but never seen 'half all the time when there's current getting
to the gauge'.

Any idea? Could it be a bad earth somewhere or is it possible that the
sending unit is blocked halfway?

Thanks in advance,


> Hey Biff,
> Why do you call your black Mk II Sprite gray?  Just curious.
> Mike C
> -----Original Message-----
>>From: Biff Jones <biffjones@verizon.net>
>>Sent: Apr 22, 2008 10:41 AM
>>To: spridgets@autox.team.net
>>Subject: Re: [Spridgets] BE Fuel Sending unit
>>The bugeye sending unit has the following resistance readings:
>>0 Ohms = open circuit (broken wire)
>>14 Ohms = Full (up position)
>>90 Ohms = Half tank
>>258 Ohms = Empty
>>These are for sending unit # FT5300/32 and gauge unit # FG2530/31or
>>Latter sending units read the opposite of above, i.e., Full = 120 Ohms,
>>Empty = 30 Ohms
>>Cork gasket should work fine without any goo.
>>Biff Jones
>>'Frogarri' '59 Bugeye
>>'Ole Gray' '61 AH Sprite
> ________________________________________
> PeoplePC Online
> A better way to Internet
> http://www.peoplepc.com
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
> You are subscribed as max@maxengland.com
> http://www.team.net/archive
> http://autox.team.net/mailman/listinfo/spridgets
Support Team.Net  http://www.team.net/donate.html



<Prev in Thread] Current Thread [Next in Thread>
  • [Spridgets] [Fwd: Re: BE Fuel Sending unit], Maxime Slegers <=