Have a look at this picture and the following ones, you'll see how I
rebuilt the front spring hanger:
Hope this helps. More pictures showing the left side will come soon.
> I took the rear end out today, and on one side, the captive bolt holding
> the front of the spring hanger was rusted/torn out. Many of the bolts
> sheared off. Also, the back of the floor panel is rusted out all across
> the joint between the rear wheel arch and the rear bulkhead. I need
> pictures of these repairs. The catalogue shows spring hanger patches and
> rear panel repair patches, but it is not clear if that is what I need.
> Any suggestions?
> Michael Rowe
> '74 Midget
> Long Island, NY
> Support Team.Net http://www.team.net/donate.html
> You are subscribed as firstname.lastname@example.org
Support Team.Net http://www.team.net/donate.html