Frank,
Did you add the buzzer before or after you found the indicator repeater
problem with the headlights on? I'm wondering if the change in
resistance in the circuit by adding the buzzer may be affecting the
repeater...
-=Chris
Chris King
http://home.comcast.net/~kvcbk/
<-----Original Message----->
>From: Frank Clarici [spritenut@comcast.net]
>Sent: 11/13/2008 4:54:44 PM
>To: mdrowe@optonline.net
>Cc: spridgets@autox.team.net
>Subject: Re: [Spridgets] Turn Signal Buzzer
>
>Michael Rowe wrote:
>> My turn-signal-off wings are tired and don't always work, so I
thought I
>would put a door buzzer in the circuit. The obvious place is at the
turn
>signal flasher unit, which is easily accessible. There is not enough
power to
>run both the flasher and the buzzer at the same time, either in series
or in
>parallel.
>I use radio shack cheapo buzzers. In fact we put one in the Holy
Sprite.
>Bugeye signals do not cancel, and I know Father Jack would be riding
>around for days with a signal on.
>Last night he heard the buzzer but I wired it to the dash indicator
lamp
>and it is taped to the steering column.
>If it's too loud, wrap a piece of tape around it.
>
>
>--
>Frank Clarici
>Toms River, NJ
>_______________________________________________
>Support Team.Net http://www.team.net/donate.html
>
>You are subscribed as cbking@alum.rpi.edu
>
>http://www.team.net/archive
>
>http://autox.team.net/mailman/listinfo/spridgets
>.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|