spridgets
[Top] [All Lists]

Re: [Spridgets] how to use an ohm meter to test an ignition coil?

To: WeslakeMonza1330@aol.com
Subject: Re: [Spridgets] how to use an ohm meter to test an ignition coil?
From: "cclabaw@juno.com" <cclabaw@juno.com>
Date: Wed, 11 Mar 2009 20:39:30 GMT
Anything that's electric and old can fail due to internal insulation breakdown; 
coils are cheap, replace it or mount it outside so the breeze can cool it.

Clay L.
'67 Sprite


---------- Original Message ----------
From: WeslakeMonza1330@aol.com
To: grunthaner@gmail.com, spridgets@autox.team.net
Subject: Re: [Spridgets] how to use an ohm meter to test an ignition coil?
Date: Wed, 11 Mar 2009 13:47:14 EDT

 
Sounds like it is going bad.  You'll also find a misfire up the rpm  range 
but not down the rpm range, especially when hot.
 
In a message dated 11/03/2009 10:26:49 GMT Standard Time,  
grunthaner@gmail.com writes:

But I  still think my coil is going or weak as she craps out
when hot. 


 
_______________________________________________
Support Team.Net  http://www.team.net/donate.html

You are subscribed as cclabaw@juno.com

http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets


____________________________________________________________
Save on Digital Photography Serivces and Hardware. Click Now!
http://thirdpartyoffers.juno.com/TGL2141/fc/BLSrjpTDvmPyO7hHM42hkL2q5h516nFz0t7Ad90aISd52knfnEoucBAL6CU/
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>