I ran my timing chain cover vent to the "Y", with an unvented cap on
the rocker cover, and the vent line on the rocker cover to the air
cleaner box. My mixture always seemed fine. The car ran fine and the
plugs always looked good. The orifice in the rocker cover vent was
less than 1/8" diameter (IIRC).
On Fri, Mar 20, 2009 at 7:28 PM, David Lieb <72spridget@gmail.com> wrote:
>> Actually- if you use the "Y" pipe then you don't need a PCV valve, it is the
>> replacement (sort of).
>> Sounds like you are good-to-go.
>
> You are going to play hob with your mixture if you do.
> David
> _______________________________________________
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|