Bill L wrote:
> Actaully there are FOUR holes in the front, two for each half of
> the tonneau.
>
>
Bill
There are 4 holes on the 65-67, And there are lift the dots AND tenax
fasteners on the Sprites.
Lift-The-Dot is what was across the front, 4 studs (lift the dot studs,
NOT Tenax studs)
You want the machine screw type as the sheet metal type will pull out or
loosen up.
If you have a marine store near by, they should have them. Do watch as
some of them these days have metric threads, not a problem if you get
the nuts for them but the normal 10/32 nuts from a part bin will not fit
the new metric machine studs.
Lift the dot studs are about 5/8" tall, or almost twice as tall as the
tenax studs.
--
Frank Clarici
Toms River, NJ
My own Fleet of Sprites
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|