spridgets
[Top] [All Lists]

Re: [Spridgets] Spiting cards... update...

To: kk7ss@verizon.net
Subject: Re: [Spridgets] Spiting cards... update...
From: Hal Faulkner <frog.aye@gmail.com>
Date: Wed, 25 Mar 2009 20:42:26 -0800
Dave,
I would bet that the carb body is not the problem.  The throttle shafts are
softer than the bodies and on two pairs of carbs that I have disassembled
the shafts were visibly worn.  You can see and feel the step where the shaft
is worn.  So if you have a good shaft you can probabaly switch shafts and
solve th problem.  Or, call your favorite usual suspect and order up a pair
of shafts, 'cuz if one is worn the other one is most likely worn as well.
Hal

 the rear carb's throttle spindle can
> be moved vertically at least 1/16" only on the left side of the body
> ...
>
> My question is... Are the carb bodies, the big bottom bits,
> interchangeable?? They *seem* to be identical...
>
> Can I swap the body (the bit that holds the jets, butterflies, etc)
> from the spare to the one in the car, swap the butterflies, etc.,
> a
> Suggestions?? Opinions??
>
>
> ...Dave G.   KK7SS
> '65 MK III Sprite in Richland, WA
>
> If I wake up in the morning, and I hurt, it means that I'm still
> alive !!
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> You are subscribed as frog.aye@gmail.com
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>