The original bugeye grille had a stud top dead center just below the
bonnet badge. When doing the metal work on my bonnet the shop welded
up the hole.
My options are to cut off the stud which I really don't want to do or
drill open the hole.
Will I be able to drill thru the weld? If so how do I get a pilot
hole in there to locate the hole? I really don't want to mess up a
beautiful paint job.
Thanks.
Phil Nase
Quakertown, PA
http://home.comcast.net/~philnasecpa/
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|